Global Cases
Animal Feed production projects
Built for modern farms and feed mills. Whether for poultry, pigs, or ruminants, our full-line equipment runs fully automated from grinding and mixing to cooling and bagging. It helps you handle large-scale production with ease.
5-7 t/h Cattle & Sheep Feed Plant in Uzbekistan
The customer had lots of cottonseed meal and alfalfa but couldn’t use them efficiently. We designed a Special grass powder pellet machine for them. It solved the clogging problem caused by high-fiber materials.
- Customer output : 5-7t/h
- Materials : cottonseed meal, alfalfa, corn powder
10 t/h Beef Cattle Fattening Feed Plant in Brazil
RICHI added a high-power ring die pellet mill and a fully automatic batching system to the line. It runs with high automation. It also meets the daily needs of a large feedlot.
- Customer output : 10t/h
- Materials : corn, soybean meal, wheat bran
3 t/h Sheep Pellet Feed Project in Australia
The customer is on a remote farm. They wanted a compact, simple line. We provided a modular small production line. The equipment is easy to operate and simple to maintain.
- Customer output : 3t/h
- Materials : oat grass powder, pea powder, limestone powder
8 t/h Modern Pig Feed Plant in Germany
The customer had very high requirements for environmental protection and automation. They also needed to meet EU standards. So we designed a fully enclosed noise-reduction workshop. We also added a pulse dust collection system.
- Customer output : 8t/h
- Materials : wheat, barley, fish meal, premix
12 t/h Broiler Feed Processing Plant in Thailand
The customer needed to expand capacity quickly to meet fast food chain orders. RICHI used a large length-to-diameter ratio ring die design. This makes the pellets softer and better for broilers’ digestion.
- Customer output : 12t/h
- Materials : corn, soybean meal, meat and bone meal, vegetable oil
1 t/h Low-Temperature Baked Cat Food Line in Canada
The customer focused on the “fresh meat” concept. They worried that high heat would destroy nutrition. We installed a twin-screw extruder. Then we optimized the drying process to use low-temperature slow baking. This reduces loss of heat-sensitive nutrients and keeps the natural flavor of fresh meat.
- Customer output : 1t/h
- Materials : chicken meal, freeze-dried meat pieces, whole grain oats
Aquatic Feed production projects
We provide customized aquatic feed solutions for different aquatic animals like fish, shrimp, and crabs. From micro-pellets to extruded feed, our equipment supports high-precision processing. You can freely switch between many formulas and pellet sizes to meet diverse farming needs.
2 t/h Tilapia Floating Feed Plant in Indonesia
Considering the high-yield local tilapia farming, we used a twin-screw extruder and optimized the parameters. The floating time of the pellets exceeded 24 hours steadily.
- Customer output : 2t/h
- Materials : corn, soybean meal, fish meal
5 t/h Sinking Fish Feed Plant in Russia
Our engineers found on site that pipes were prone to cracking after winter shutdowns. So we added insulation design to key parts of the line. We adjusted the compression ratio of the ring die pellet mill to ensure the pellets are compact. They sink quickly in water and keep a stable structure.
- Customer output : 5t/h
- Materials : soybean meal, fish meal, premix
8 t/h Mixed Fish Feed Plant in Vietnam
The customer farms both seabass (floating feed) and carp (sinking feed). We met this dual need by adjusting extrusion parameters through the control system. This allows fast switching between floating and sinking pellet production.
- Customer output : 8t/h
- Materials : imported fish meal, soybean meal, wheat, bran
5 t/h Shrimp + Tilapia + Chicken Feed Line in Mexico
Because the local market values both aquaculture and poultry, we equipped the line with a double-shaft mixer and a ultra-fine grinder to support double grinding for shrimp feed. The pellet mill has two ring dies for fast changeover between different products.
- Customer output : 5t/h
- Materials : fish meal, corn, soybean meal, premix
1.5 t/h Crayfish Feed Plant in Australia
RICHI provided a ring die pellet mill to produce 1.5 mm sinking pellets. This ensures high stability in water and good palatability.
- Customer output : 1.5t/h
- Materials : fish meal, blood meal, soybean meal, wheat middlings
3 t/h Ornamental Fish Feed Plant in Netherlands
To achieve high floating ability and color enhancement for tropical fish feed, we used a twin-screw extruder with natural color enhancers. The pellets float for over 24 hours without breaking apart.
- Customer output : 3t/h
- Materials : fish meal, astaxanthin, flour, spirulina
Biomass Pellets Production Project
We turn farm and forest waste into high-value green energy. Our biomass pellet lines adapt to many raw materials. Whether hardwood, softwood, or various crop straws, they form pellets efficiently. Core components use wear-resistant technology, ensuring stable and durable operation under heavy work.
3-5 t/h Mixed Softwood Waste Pellet Plant in Canada
The raw materials came from sawmills and panel mills, with some glue content. We installed a permanent magnet drum and a drum screen at the front of the line. This prevents hard impurities from damaging the crusher. We also adjusted the ring die compression ratio to prevent sticking.
- Customer output : 3-5t/h
- Materials : pine, fir sawdust and offcuts
5-6 t/h Sawdust Pellet Line in USA
Fine materials like sawdust and bark tend to create too much dust in the cooling section. We designed a multi-channel dryer and an automatic packaging line for the customer.
- Customer output : 5-6t/h
- Materials : sawdust, bark, forestry waste
1 t/h Corn Straw Biomass Fuel Plant in Argentina
The area has plenty of corn straw resources. We set up the RICHI MZLH420 ring die pellet mill for them. The straw is ground to 3-5 mm and then pelleted for industrial boilers and home heating.
- Customer output : 1t/h
- Materials : corn straw
3-4 t/h Alfalfa Pellet Plant in Spain
Dried alfalfa is light in weight. A normal hopper didn’t feed smoothly. So we added a horizontal forced feeder with a Siemens variable frequency motor. The current fluctuation during pelleting was significantly reduced.
- Customer output : 3-4t/h
- Materials : alfalfa
3-5 t/h Oat Grass Pellet Plant in Australia
We suggested the customer mix a small amount of limestone powder (locally available) into the material. This effectively reduced the frequency of caking on the inner surface of the ring die during oat grass pelleting.
- Customer output : 3-5t/h
- Materials : oat grass straw
4-6 t/h Palm Kernel Shell Pellet Plant in Malaysia
Palm kernel shells are very hard and abrasive. Ordinary ring dies wear out quickly. We delivered alloy steel ring dies treated with deep carburization and quenching. We also used heavy-duty SKF bearings and thickened roller shells. The customer reported a significantly longer service life.
- Customer output : 4-6t/h
- Materials : palm kernel shells
Organic Fertilizer production project
Our organic fertilizer lines combine harmless treatment with resource recovery. Using scientific fermentation and granulation, we turn waste into high-value commercial organic fertilizer. This achieves both ecological and economic benefits.
7 t/h Distiller’s Grains & Herb Residue Mixed Pellet Plant in France
The line included a press filter dewatering section. It reduced the initial moisture from 75% to about 35%. We adjusted the ring die compression ratio to suit the high-fiber sticky material. The whole line design meets EU environmental requirements.
- Customer output : 7t/h
- Materials : distiller’s grains, herb residues
5 t/h Cow Manure Pellet Line in South Africa
The line uses a high-temperature fermentation process in a fermentation tank. We added locally available corn straw to adjust the carbon-to-nitrogen ratio.
- Customer output : 5t/h
- Materials : cow manure, corn straw
10 t/h Straw & Cow Manure Mixed Pellet Plant in Canada
The customer worked with local farms to process both straw and cow manure together. Our engineers designed a dual-bin batching system. It controls the straw grinding particle size and the cow manure dewatering ratio separately. Then it mixes them automatically.
- Customer output : 10t/h
- Materials : wheat straw, cow manure
4 t/h Soybean Meal & Corn Stalk Pellet Plant in Kenya
We helped the customer with formula testing. Using local soybean meal and corn stalks, we produced high-nitrogen organic fertilizer pellets via a ring die pellet mill.
- Customer output : 4t/h
- Materials : soybean meal, corn stalks
10-12 t/h Cassava Peel & Sludge Pellet Plant in Thailand
We designed a complete solution covering dewatering, fermentation, and pelleting. One line can produce both powder and pellet organic fertilizer. This gives them flexibility for different market needs.
- Customer output : 10-12t/h
- Materials : cassava peel, starch sludge
6 t/h Food Waste & Sludge Co-Processing Plant in Germany
The customer’s raw materials had high moisture. So we added oil separation and impurity removal steps. We also included a bio-filter deodorizing system to meet local emission standards.
- Customer output : 6t/h
- Materials : food waste, sludge
Why Choose RICHI
Every step from needs assessment to line delivery has been proven in practice.
We don’t just piece equipment together. We connect each section of the line with reliable manufacturing quality. Relying on global delivery experience, we ensure you get an industrial asset that runs steadily for many years.
30+ years of industry experience
With over thirty years of full-line delivery experience, we know every step from raw material pretreatment to pelleting and bagging. We can accurately predict and solve both common and potential production problems.
International quality certifications
We hold CE and ISO certifications. We select high-standard materials for manufacturing. Every machine is strictly inspected before leaving the factory to ensure it meets international quality standards.
Customized solutions
No one-size-fits-all. We design different pellet lines based on your raw material properties, capacity expectations, plant space, local climate, and other conditions.
One-stop turnkey service
We provide full “turnkey” service from design, manufacturing, shipping, installation, and commissioning to training. You just tell us your needs. We handle the rest.
Global project experience
Our products and solutions have been delivered to over 140 countries across six continents. Our rich cross-border project experience will be part of your custom solution.
Lifetime technical support
In addition to a 12-month warranty, we offer lifetime technical support and quick response. After the warranty period, you only pay for parts for repairs. This ensures your equipment runs stably for a long time.
About RICHI Machinery
Based in China and serving global markets, RICHI Machinery is a global manufacturer and engineering service provider specializing in pellet production equipment and complete processing systems. From feed, biomass, and organic fertilizer to cat litter and agricultural waste recycling, we help customers build efficient, reliable, and scalable production solutions tailored to their raw materials, capacity requirements, and market goals. With projects delivered across multiple industries and countries, our focus is always on practical performance, long-term operation, and customer success.
Advanced Engineering & Intelligent Manufacturing
Driven by technology and manufacturing expertise, RICHI integrates process engineering, equipment R&D, intelligent manufacturing, and project delivery into one complete service system. Our modern production facilities, precision machining capabilities, and experienced technical team allow us to provide customized equipment, complete plant design, automation integration, installation guidance, and ongoing technical support. From single machines to fully integrated production lines, we deliver solutions designed for stability, efficiency, and sustainable production growth.
Frequently Asked Questions
This information helps you quickly understand RICHI’s advantages and how we cooperate.
Are the machines made in your own factory?
Yes. We have a modern manufacturing base of over 60,000 square meters. We have full R&D and manufacturing capabilities. We can provide custom design and production based on your specific needs.
How can I confirm product reliability? Can I visit the factory?
Very welcome. You can visit our factory in person. We also support online virtual tours. At the same time, we can provide customer cases similar to your needs for reference.
For quality control, all machines are strictly inspected and meet SGS and CE standards. Core components use high-standard processes and imported quality materials like Siemens motors and SKF bearings. This makes sure stable and durable equipment.
Can I buy just a single machine instead of a full line?
Of course. We sell both single machines and complete lines. We can also custom a comprehensive solution based on your raw material properties, target output, budget, and other factors.
Do you support formula testing?
Yes. You just provide the formula. We will run a full test on our equipment strictly according to the mix ratio. And we will send you the complete test video or recording.
Can one line produce multiple pellet types? How do you switch?
Yes. Usually you adjust parameters of the core equipment (like the pellet mill or extruder) such as compression ratio. The exact switching process varies by line type. We can explain it in detail during the design phase.
What does your after-sales service include?
We provide full support:
Warranty: 1 year for the whole machine.
Technical support: Remote guidance or on-site commissioning and training.
Spare parts: We have multiple overseas warehouses to deliver damaged parts as fast as possible.
On-site response: If needed, our engineers can arrive within 48 hours.
